{"product_id":"1791284-powermatic-ts29-7-1-2hp-3ph-230v-460v-tilt-slide-shaper-with-sliding-table-woodworking","title":"Powermatic TS29 Shaper with Sliding Table, 7.5HP, 3PH, 230\/460V 1791284","description":"\u003ch2\u003ePowermatic TS29 Shaper with Sliding Table, 7.5HP, 3PH, 230\/460V 1791284\u003c\/h2\u003e\n\u003cp\u003eThe new TS29 Tilt\/Slide Shaper is ready to tackle any job. A new fence design includes dual digital readouts, micrometer adjustments and independently adjustable fence halves for fast, accurate set-ups. The full guard includes two stock hold-downs and a see-through cover that flips up for quick tool changes. Dual dust collection ports, in the guard and under the table insure a clear work area and improved finish. An extra large quill assembly with a full seven inch stroke has three oversize bearings and the ability to tilt, adding versatility and insuring long, trouble-free performance. Powered by a big 7-1\/2HP motor that drives the spindle forward and reverse with five speeds. The massive sliding table is fully supported by six tapered precision bearings through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56\" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSliding table with 4-foot stroke works with miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons\u003c\/li\u003e\n\u003cli\u003eFully adjustable fence with dual digital readout for fast, accurate set-up and repeatability\u003c\/li\u003e\n\u003cli\u003eLarge table with built-in slider with room for stock feeder\u003c\/li\u003e\n\u003cli\u003e7\" vertical spindle travel allows stacked tooling\u003c\/li\u003e\n\u003cli\u003eSpindle tilts negative 5° to positive 45° for increased versatility\u003c\/li\u003e\n\u003cli\u003eLarge diameter multiple table inserts accomodate virtually any size cutter\u003c\/li\u003e\n\u003cli\u003eFive spindle speeds in forward and reverse with lighted indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStyle (Type) Shaper \u003c\/li\u003e\n\u003cli\u003eSpindle Speed (RPM) 3,000, 4,000, 6,000, 8,000, 10,000 \u003c\/li\u003e\n\u003cli\u003eMaximum Spindle Diameter (In.) 1-1\/4 \u003c\/li\u003e\n\u003cli\u003eSpindle Size Under Nut (In.) 3\/4 (3-1\/2), 1 (6-1\/4), 1-1\/4 (6-1\/4) \u003c\/li\u003e\n\u003cli\u003eSpindle Travel (In.) 7 \u003c\/li\u003e\n\u003cli\u003eSpindle Tilt (Deg.) 45 Forward, 5 Back \u003c\/li\u003e\n\u003cli\u003eReversible Yes \u003c\/li\u003e\n\u003cli\u003eRouter Bit Collet Included 1\/4, 1\/2 \u003c\/li\u003e\n\u003cli\u003eMaximum Diameter Cutter Above Table (In.) 12 \u003c\/li\u003e\n\u003cli\u003eMaximum Diameter Cutter Below Table (In.) 9 \u003c\/li\u003e\n\u003cli\u003eTable Inserts (In.) 3: One Tilting, Two Straight \u003c\/li\u003e\n\u003cli\u003eTable Size (In.) 51-1\/2 x 33-1\/2 \u003c\/li\u003e\n\u003cli\u003eTable Travel (In.) 49-1\/4 \u003c\/li\u003e\n\u003cli\u003eSliding Table Size (In.) 11-1\/4 x 51-1\/4 \u003c\/li\u003e\n\u003cli\u003eFence Size (L x H) (In.) 46 x 5 \u003c\/li\u003e\n\u003cli\u003eFence Travel (Major and Minor) (In.) 5-3\/8, 3-5\/8 \u003c\/li\u003e\n\u003cli\u003eDust Port Outside Diameter (In.) 5 \u003c\/li\u003e\n\u003cli\u003eDust Collection Minimum CFM Required (CFM) 800 \u003c\/li\u003e\n\u003cli\u003eElectrical Controls Yes \u003c\/li\u003e\n\u003cli\u003eMotor Power (HP) 7-1\/2 \u003c\/li\u003e\n\u003cli\u003eMotor Phase 3 \u003c\/li\u003e\n\u003cli\u003eMotor Voltage (V.) 230, 460 \u003c\/li\u003e\n\u003cli\u003ePrewired Voltage (V.) 230\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty and Service:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWalter Meier (Manufacturing) Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier (Manufacturing) Inc. Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePowermatic 5-year Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePOWERMATIC products carry a limited warranty which varies in duration based upon the product. This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage. The warranty covers only the initial purchaser of the product.\u003c\/p\u003e","brand":"Powermatic","offers":[{"title":"Default Title","offer_id":44842465361989,"sku":"PM1791284","price":15399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/1305\/5301\/files\/1791284_main.jpg?v=1775163081","url":"https:\/\/machinehorizon.com\/products\/1791284-powermatic-ts29-7-1-2hp-3ph-230v-460v-tilt-slide-shaper-with-sliding-table-woodworking","provider":"Machine Horizon","version":"1.0","type":"link"}