Novatek VA15EHFL 15-Gal Electric HEPA Floor Vacuum – 110 CFM, 120V, 70 lbs

Novatek VA15EHFL 15-Gallon Electric HEPA Floor Vacuum

The Novatek VA15EHFL is a 15-gallon, cold-rolled steel HEPA floor vacuum built for asbestos abatement, lead remediation, and mold containment. Producing 110 CFM at 110" static lift on 120V/12.5A power, it runs a 4-stage filtration system with an individually certified HEPA filter rated at 99.97% efficiency at 0.3 microns. The epoxy-coated steel interior and front swivel casters with large rear wheels support continuous heavy-duty operation on industrial job sites.

VA15EHFL – Key Specifications and Features

• Model: VA15EHFL (electric)
• Airflow: 110 CFM, 110" static lift
• Power: 120V, 60 Hz, 12.5A
• Tank capacity: 15 gallons, cold-rolled steel with epoxy-coated interior
• Filtration: 4-stage — pre-filter, disposable bags, individually certified HEPA (99.97% @ 0.3 µm)
• Hose: 6-ft × 1.5" crush-proof vacuum hose
• Dimensions: 23 × 23 × 38 in
• Weight: 70 lbs

Where the VA15EHFL Performs

Asbestos abatement contractors use the VA15EHFL for Class III and Class II regulated area cleanup where HEPA-certified equipment is required by OSHA. Environmental remediation crews rely on its 15-gallon capacity to handle large debris volumes without frequent tank changes during lead paint removal. Hospital environmental services teams run it in renovation containment zones where the 4-stage filtration ensures particles captured in Stage 1 never reach the HEPA filter prematurely. The electric motor is the correct choice for enclosed spaces with consistent 120V access, keeping noise at workable levels and eliminating the air compressor requirement.

4-Stage Filtration and HEPA Certification Detail

Novatek individually tests and certifies each HEPA filter before installation — a distinction from units that ship with batch-tested filters. The 4-stage sequence begins with a primary pre-filter that captures large debris, passes through disposable filter bags that extend HEPA life, then reaches the certified HEPA stage before exhausting clean air. This staged approach allows higher total throughput before filter replacement becomes necessary, lowering per-job consumable costs on large abatement projects.

Documents

Manual