US Products Cobra Mini 750H Heated Spot Extractor – 750W, 95 CFM, 85" Lift, 05-10020-006

Cobra Mini 750H Heated Portable Spot Extractor — Machine Only, 05-10020-006

The US Products Cobra Mini 750H is a purpose-built heated spot extractor weighing 32 lbs, with a 750W inline heater, 95 CFM airflow, 85" water lift, and 55 PSI solution pump. At 21" × 12" × 31", it fits in a standard cargo van without a ramp. The 05-10020-006 machine-only SKU ships without wand or hose for operators adding to an existing tool inventory.

Cobra Mini 750H — Verified Specifications

• Heater: 750W inline — raises solution temperature for active soil emulsification
• Vacuum motor: Single 2-stage, 95 CFM airflow, 85" water lift
• Solution pump: 55 PSI — consistent spray pressure at the wand tip
• Solution tank: 2.2 gallons
• Recovery tank: 2.5 gallons with float auto shut-off
• Weight: 32 lbs
• Dimensions: 21" L × 12" W × 31" H
• Warranty: 10-year limited housing, 2-year major components, 90-day wear parts

Where the 750W Heater Makes a Measurable Difference

Auto detailing extraction is the primary use case for the 750H — vehicle interiors accumulate skin oils, food grease, and protein-based soils in seat fabric and carpet that cold water cannot fully emulsify. The 750W inline heater raises solution temperature at the wand tip, activating cleaning chemistry and releasing bonded soils that ambient-temperature extraction leaves behind. On upholstered furniture restoration, heated extraction accelerates dry times by delivering drier steam-temperature solution rather than room-temperature water.

Float Shut-Off and Recovery Tank — Running the Machine Safely

The 2.5-gallon recovery tank holds more water than the 2.2-gallon solution tank feeds per fill cycle, so a single fill of solution to the fill line will not overflow the recovery side under normal use. The float shut-off automatically cuts vacuum when the recovery tank reaches capacity, protecting the motor from running against a full tank. On sustained upholstery extraction jobs, plan to empty the recovery tank every 2–3 fill cycles depending on carpet moisture content.